Life estimates for fatigue crack growth with constant amplitude loading using numerical integration

Authors

Keywords:

Crescimento de trinca. Vida fadiga. Mecânica da fratura. Integração numérica., Crack growth. Fatigue life. Fracture mechanics. Numerical integration.

Abstract

It is known that fracture mechanics has become very important in the design of projects and the development of the maintenance plan for a particular component. Better predictions of failure directly influence the economic cost of the project beneficially, when it is possible to guarantee a safe life in components with the presence of a crack. In this way, several studies have contributed to improving the prediction of the failure of a certain part. The objective of this work is to define the mechanical properties of 7075 T6 aluminum as fracture toughness and Paris law C and m coefficients for crack growth, in addition to comparing the fatigue crack growth test experimentally with the numerical integration method for a load of constant amplitude with a load ratio (R) equal to 0.1. The results presented were satisfactory, enabling the obtaining of reliable values of the Paris constants, as well as the verification of the crack propagation rate when compared to the literature data. Finally, with the analysis of the results, it can be inferred that the use of the coefficients obtained experimentally provides more conservative and precise values of the life estimate than those available in the literature for the evaluated material. This, therefore, further emphasizes the importance of experimental tests in fracture mechanics.

Downloads

Download data is not yet available.

References

Abdelkader, M., Mokhtar, Z., Mohamed, B., Mohamed, M., & Abdelwaheb, A. (2013). Crack propagation under variable amplitude loading. Materials Research, 16(5), 1161”“1168. https://doi.org/10.1590/S1516-14392013005000110

ASTM E-399. (2017). Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of. https://doi.org/10.1520/E0399-09E02.2

ASTM E-647, A. S. (2016). ASTM E647 - Standard Test Method for Measurement of Fatigue Crack Growth Rates. ASTM Book of Standards, 03(July), 1”“49. https://doi.org/10.1520/E0647-15E01.2

Broek, D. (1982). Elementary engineering fracture mechanics.

Dowling, N. E. (2013). Mechanical behavior of materials. In Pearson Education Limited (Fourth, Vol. 1, Issue 4). Pearson Education Limited.

Du, X., He, Y., Zhang, T., Gao, C., Zhang, T., & Zhang, S. (2019). An effective Bayesian method for probability fatigue crack propagation modeling through test data. Mathematical Problems in Engineering, 2019(1). https://doi.org/10.1155/2019/7843627

Fernández-Canteli, A., Blasón, S., Pyttel, B., Muniz-Calvente, M., & Castillo, E. (2020). Considerations about the existence or non-existence of the fatigue limit: implications on practical design. International Journal of Fracture, 223(1”“2), 189”“196. https://doi.org/10.1007/s10704-019-00413-6

Kumar, A., Murthy, A. R., & Iyer, N. R. (2014). Crack growth prediction under variable amplitude loading considering elastic-plastic stress field ahead of crack tip. Procedia Engineering, 86, 645”“652. https://doi.org/10.1016/j.proeng.2014.11.065

Ljustell, P. (2013). Fatigue crack growth experiments and analyses-from small scale to large scale yielding at constant and variable amplitude loading, Phd Thesis. 81, p58. http://kth.diva-portal.org/smash/record.jsf?pid=diva2:583741

Lu, Y. chao, Chen, T., Yang, F. peng, & Lan, T. (2020). The retardation effect of static torsion on fatigue crack growth in strip steel. Fatigue and Fracture of Engineering Materials and Structures, March, 1800”“1813. https://doi.org/10.1111/ffe.13233

Paris, P., & Erdogan, F. (1963). A critical analysis of crack propagation laws. Journal of Fluids Engineering, Transactions of the ASME, 85(4), 528”“533. https://doi.org/10.1115/1.3656900

Zhang, W., Wang, Q., Li, X., & He, J. (2016). Using the Modified NASGRO Equation. 2016. https://doi.org/10.1016/j.ceca.2008.07.002

Published

2020-09-02

How to Cite

Fernandes, D. de O., Souza, B. F. ., & Carla Tatiana. (2020). Life estimates for fatigue crack growth with constant amplitude loading using numerical integration. Revista Interdisciplinar De Pesquisa Em Engenharia, 6(1), 71–80. Retrieved from https://periodicos.unb.br/index.php/ripe/article/view/33771