DESCRIÇÃO DA OPERAÇÃO DO SOFTWARE LIGGGHTS®- PUBLIC PARA A DEPOSIÇÃO DE PARTÍCULAS COM COESÃO PELO DEM EM UMA CAÇAMBA DE CAMINHÃO

Autores

  • Luiza Fabrino Favato PUC
  • Daniel Borges de Oliveira PUC
  • Jánes Landre Junior PUC
  • Pedro Américo Almeida Magalhães Júnior PUC
  • Claysson Bruno Santos Vimieiro PUC

DOI:

https://doi.org/10.26512/ripe.v2i5.21255

Palavras-chave:

LIGGGHTS®-PUBLIC, Método de Elementos Discretos, Deposição de partículas, Open-Source, Modelo de Hertz, Modelo de Coesão JKR

Resumo

Neste artigo é apresentado o procedimento utilizado para a simulação da deposição de componentes granulares com coesão em um modelo que representa a geometria de uma caçamba para transporte de minério através do Método de Elementos Discretos (MED) utilizando o software open source LIGGGHTS®-PUBLIC. Este artigo servirá para auxiliar futuras pesquisas e simulações MED no software LIGGGHTS, possibilitando um futuro refino dos resultados.

Downloads

Não há dados estatísticos.

Referências

Carvalho, L.C.S., Mesquita, A.L.A., Gomes, L.M., Neto, E.F., Mafra, M.P., 2012. Análise de modelos de coesão capilar para a simulação numérica de escoamento de granulados, Anais: VII Congresso Nacional de Engenharia Mecânica ”“ CONEM 2012, São Luís-Maranhão.

Del Cid, L. I., 2015. A discrete element methodology for the analysis of cohesive granular bulk solid materials. Dissertação de Doutorado ”“ Departamento de Engenharia Mecânica, Colorado School of Mines, United States ”“ Colorado. Disponível em: < http://search.proquest.com/docview/1680842491>.

Geuzaine, C. and Remacle, J.-F, 2009. Gmsh: a three-dimensional finite element mesh generator with built-in pre- and post-processing facilities. International Journal for Numerical Methods in Engineering, Volume 79, Issue 11, pages 1309-1331.

He, Y., Wang, Z., Evans, T.J., Yu, A.B., Yang, R.Y., 2015. DEM study of the mechanical strength of iron ore compacts, International Journal of Mineral Processing, Volume 142, 10 Setembro de 2015, Páginas 73-81, ISSN 0301-7516, Disponível em: <http://dx.doi.org/10.1016/j.minpro.2015.05.005>.

Jahani, M., Farzanegan, A., Noaparast, M., 2015. Investigation of screening performance of banana screens using LIGGGHTS DEM solver, Powder Technology, Volume 283, October 2015, Pages 32-47, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.05.016.

Karvatskii, A. Ya., Lazarev, T. V., 2014. Evaluation of the Discrete Element Method for Predicting the Behavior of Granular Media Using Petroleum Coke as an Example, Chemical and Petroleum Engineering, Volume 50, Número 3, Páginas 186-192, ISSN 1573-8329, http://dx.doi.org/10.1007/s10556-014-9877-y.

Kloss, C., Goniva, C., Hanger A., Amberger S., Pirker S., 2012. Models, algorithms and validation for opensource DEM and CFD-DEM. Progress in Computational Fluid Dynamics, An Int. J. Vol. 12, No.2/3 pp. 140 ”“ 152

Maknickas, A., KaÄeniauskas, A , KaÄianauskas, R , BaleviÄius, R , Džiugys, A, 2006. Parallel DEM Software for Simulation of Granular Media, Informatica, v.17 n.2, Abril de 2006 p.207-224.

MPICH Message Passing Interface (MPI) standard. Disponível em: < http://www.mpich.org/>. Acesso em: 5 maio. 2016.

Nassauer, B., Liedke, T., & Kuna, M., 2013. Polyhedral particles for the discrete element method. Granular Matter, 15:85”“93. DOI 10.1007/s10035-012-0381-9

Padrós, C. Bosch, 2014. Discrete element simulations with LIGGGHTS. Dissertação (Master of Science in Computational Mechanics), Swansea University.

Parteli, Eric J. R., 2013. DEM simulation of particles of complex shapes using the multisphere method: Application for additive manufacturing. AIP Conference Proceedings, 1542, 185-188, DOI:http://dx.doi.org/10.1063/1.4811898.

Tsuji T., Nakagawa Y., Matsumoto N., Kadono Y., Takayama T., Tanaka T., 2012. 3-D DEM simulation of cohesive soil-pushing behavior by bulldozer blade. Journal of Terramechanics, Volume 49, Issue 1, Fevereiro 2012, Pages 37-47, ISSN 0022-4898, Disponível em: <http://dx.doi.org/10.1016/j.jterra.2011.11.003>.

Wang, D., Servin, M., Berglund, T., Mickelsson, . K.-O. Rönnbäck, S., 2015. Parametrization and validation of a nonsmooth discrete element method for simulating flows of iron ore green pellets, Powder Technology, Volume 283, Outubro de 2015, Páginas 475-487, ISSN 0032-5910, Disponível em: http://dx.doi.org/10.1016/j.powtec.2015.05.040

Zhao J., Shan T., 2013. Coupled CFD”“DEM simulation of fluid”“particle interaction in geomechanics, Powder Technology, Volume 239, May 2013, Pages 248-258, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2013.02.003.

Downloads

Publicado

2017-08-22

Como Citar

Favato, L. F., Oliveira, D. B. de, Landre Junior, J., Magalhães Júnior, P. A. A., & Vimieiro, C. B. S. (2017). DESCRIÇÃO DA OPERAÇÃO DO SOFTWARE LIGGGHTS®- PUBLIC PARA A DEPOSIÇÃO DE PARTÍCULAS COM COESÃO PELO DEM EM UMA CAÇAMBA DE CAMINHÃO. Revista Interdisciplinar De Pesquisa Em Engenharia, 2(5), 202–218. https://doi.org/10.26512/ripe.v2i5.21255

Artigos mais lidos pelo mesmo(s) autor(es)

1 2 > >>